SDR ATLAS — Windows setup 0.5.3 / Установка для Windows

РУССКИЙ
1. Полностью распакуйте архив. Если папка не открылась, откройте место распаковки.
2. Запустите Install.cmd. Для скачанного вами файла в предупреждении Windows нажмите «Запустить».
3. Вверху мастера выберите RU или EN. Выбранный язык сохранится после успешной установки.
4. Используйте найденный SDR++ или выберите «Скачать и установить SDR++». Мастер скачает официальную сборку, проверит SHA256 и распакует её.
5. При первом запуске дождитесь главного окна SDR++, затем закройте его крестиком. Мастер продолжит работу.
6. Дождитесь «УСТАНОВКА ЗАВЕРШЕНА — ATLAS 0.5.3».
Для обновления используйте найденный SDR++. Прежние профили и настройки сохраняются.
Новые профили Airspy HF+ с поддержкой КВ: 7,074 МГц USB, поток не шире 24 кГц / Int16, шкала −160…−130 дБ.
Для изменения языка компонента повторно запустите мастер и выберите RU или EN.

ENGLISH
1. Extract the complete archive. If the folder does not open, go to the extraction destination.
2. Run Install.cmd. If Windows displays a publisher warning for the file you downloaded, click Run.
3. Choose RU or EN at the top of the wizard. Your choice is saved after successful installation.
4. Use detected SDR++ or choose Download and install SDR++. The wizard downloads the official build, verifies SHA256 and extracts it.
5. On the first SDR++ launch, wait for its main window, then close it using the X button. Setup will continue.
6. Wait for SETUP COMPLETE — ATLAS 0.5.3.
To update, use the detected SDR++. Existing profiles and settings are preserved.
New Airspy HF+ profiles with HF coverage: 7.074 MHz USB, a stream no wider than 24 kHz / Int16, scale −160…−130 dB.
To change the component language, run the wizard again and choose RU or EN.

Administrator rights are not needed. The system PowerShell policy is not changed.
Radio data travels directly between the receiver and your computer.
If the preliminary server check fails, you may choose whether to attempt opening SDR++.
The ATLAS website offers a local installation check. It does not confirm receiver availability or audio.
To remove link registration, use Uninstall.ps1 in %LOCALAPPDATA%/SDRAtlas. Profiles and downloaded SDR++ are kept.
All PowerShell files use UTF-8 with BOM for Windows PowerShell 5.1.

Проверка HB9AZT без установки: запустите Check-HB9AZT.cmd из распакованного архива. Будут показаны права управления, частота устройства и границы IQ/FFT. Частота и поток не меняются. Это состояние только проверочного подключения. При ограничении управления ATLAS приостанавливает автоматический запуск SDR++; неизвестные права отмечаются отдельно.

Check HB9AZT without installing: run Check-HB9AZT.cmd from the extracted archive. It reports control permissions, device frequency and IQ/FFT limits. No tuning or stream is started. This is only a snapshot for the probe connection. ATLAS stops automatic SDR++ launch when device control is restricted; unknown permissions are reported separately.
